What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 00:05

A circuit breaker is similar, but is resettable.
[old diagram got deleted by accident]
but this device (an Inductor) … impedes the rapid changes in the current.
What was the first Native American tribe to inhabit Long Island, NY?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It also is a device that limits the change in current flow.
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Do you find Anushka Sen attractive?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The other is “what does a “fuse” do?”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–16 [ OO OLAOYE OYEBODE ]
Is it true that LGB should drop T?
The third is lightning and “how it gets conducted into a home.”
What is lightning?
These devices are installed between the “hot” and “neutral” and protective ground.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why in my 60s do I have a strong desire to suck cock and swallow?
eight
One is “what exactly is in a ‘surge protector’ ? ”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Kate Middleton Shares a Rare Family Photo After Trooping the Colour - instyle.com
For this case there are devices called Metal oxide varistors (MOV).
The bolt then partially travels down the line to your home.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
What was your best unexpected reunion with your childhood best friend?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But it can get overloaded, and no longer works.
These are simplified answers to the original question, and does not change anything I wrote above.
˗ˋˏ ♡ ˎˊ˗ NEW WOMAN - analysis ˗ˋˏ ♡ ˎˊ˗
There are three different concepts here that are getting confused.
So, the voltage could go up to 500 volts, and the fuse will not open up.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is Quora? Are there any tips?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This one hit behind the barn.
a photo is worth a thousand words.
so, what happens?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
what exactly is a ‘surge’ protector?
It seems Mohan does not understand the difference between a comment and an Answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
the problem then depends on "how fast does the fuse operate?".
What a list actors/ actresses are notorious for being jerks in real life?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then asserts :
At one ohm, the resistor has a maximum of 1 watt power.
Have you ever really seen aliens or UFOs by yourself? Can you share your experience?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but I think this circuit , shows a few more pieces.
What does a fuse do?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Barnstars:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Here is a simplified AC power diagram.
I post the exact comment here.
One
A fuse is a non-resetable over current circuit protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes the function of a fuse.
An AC voltage/ current source, and an ac inductive load.
This is where the MOV conducts again, and dissipated the energy.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Now when you have a certain ac resistance, then a current flows in a loop.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
At least they know the answer if they wanted it.
Edit 2024–10.
Upvotes:
nine
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is 'the assistant's answer'
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
First Sentence:
The MOV will conduct when the voltage exceeds 50% of line voltage.
There are two important concepts here.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
In schematic diagrams this is the symbol for a fuse:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Because the load is inductive, the current lags the voltage.(by a bit).
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–14 [Omar Gharbi Omar Gharbi ]